|
|
|
|
| |
Credit:
The information has been provided by Microsoft Security Bulletin MS07-045.
The original article can be found at:
http://www.microsoft.com/technet/security/bulletin/ms07-045.mspx
|
| |
Affected Software:
* Microsoft Windows 2000 Service Pack 4
* Internet Explorer 5.01
* Internet Explorer 6 Service Pack 1
* Internet Explorer 6
* Windows XP Service Pack 2
* Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2
* Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2
* Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2
* Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems
* Internet Explorer 7
* Windows XP Service Pack 2
* Windows XP Professional x64 Edition and Windows XP Professional x64 Edition Service Pack 2
* Windows Server 2003 Service Pack 1 and Windows Server 2003 Service Pack 2
* Windows Server 2003 x64 Edition and Windows Server 2003 x64 Edition Service Pack 2
* Windows Server 2003 with SP1 for Itanium-based Systems and Windows Server 2003 with SP2 for Itanium-based Systems
* Windows Vista
* Windows Vista x64 Edition
CSS Memory Corruption Vulnerability - CVE-2007-0943:
A remote code execution vulnerability exists in the way Internet Explorer parses certain strings in CSS. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged on user..
To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2007-0943.
Mitigating Factors for CSS Memory Corruption Vulnerability - CVE-2007-0943:
Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:
* In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site.
* An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
* Internet Explorer 6 and 7 are not affected by this vulnerability.
FAQ for CSS Memory Corruption Vulnerability - CVE-2007-0943:
What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged on user.
What causes the vulnerability?
When Internet Explorer parses certain CSS strings under certain conditions, memory may be corrupted in such a way that an attacker could execute arbitrary code in the context of the logged-on user.
What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the logged on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability and then persuade a user to view the Web site. This can also include compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to persuade users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.
What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user is logged on and visits a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.
What is CSS?
CSS or Cascading Style Sheets is a formatting method for Web pages using HTML. For more information about CSS, visit the Microsoft TechNet Web site.
What does the update do?
The update prevents memory corruption when Internet Explorer parses CSS text.
When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.
When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.
ActiveX Object Vulnerability - CVE-2007-2216:
A remote code execution vulnerability exists in the ActiveX control, tblinf32.dll. This control can also be found under the name of vstlbinf.dll. Both of these components were never intended to be supported in Internet Explorer. An attacker could exploit the vulnerability by constructing a specially crafted Web page that could potentially allow remote code execution if a user visited the Web page. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged on user.
To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2007-2216.
Mitigating Factors for ActiveX Object Vulnerability - CVE-2007-2216:
Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:
* In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail or Instant Messenger message that takes users to the attacker's Web site.
* An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Workarounds for ActiveX Object Vulnerability - CVE-2007-2216:
Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:
* Prevent COM objects from running in Internet Explorer
You can disable attempts to instantiate a COM object in Internet Explorer by setting the kill bit for the control in the registry.
Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
For detailed steps that you can use to prevent a control from running in Internet Explorer, see Microsoft Knowledge Base Article 240797. Follow these steps in this article to create a Compatibility Flags value in the registry to prevent a COM object from being instantiated in Internet Explorer.
Note The Class Identifiers and corresponding files where the COM objects are contained are documented under What does the update do? in the FAQ for ActiveX Object Vulnerability - CVE-2007-2216 subsection. Replace {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} below with the Class Identifiers found in that FAQ subsection.
To set the kill bit for a CLSID with a value of {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}, paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{ XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }]
"Compatibility Flags"=dword:00000400
You can apply this .reg file to individual systems by double-clicking it. You can also apply it across domains by using Group Policy. For more information about Group Policy, visit the following Microsoft Web sites:
* Group Policy collection
* What is Group Policy Object Editor?
* Core Group Policy tools and settings
Note You must restart Internet Explorer for your changes to take effect.
Impact of Workaround: There is no impact as long as the object is not intended to be used in Internet Explorer.
* Set Internet and Local intranet security zone settings to High to prompt before running ActiveX Controls and Active Scripting in these zones
You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.
To raise the browsing security level in Microsoft Internet Explorer, follow these steps:
1. On the Internet Explorer Tools menu, click Internet Options.
2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.
Note If no slider is visible, click Default Level, and then move the slider to High.
Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.
Impact of workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone .
* Add sites that you trust to the Internet Explorer Trusted sites zone
After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.
To do this, follow these steps:
1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5. Repeat these steps for each site that you want to add to the zone.
6. Click OK two times to accept the changes and return to Internet Explorer.
Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.
FAQ for ActiveX Object Vulnerability - CVE-2007-2216:
What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged on user.
What causes the vulnerability?
The control implemented IObjectsafety incorrectly. For more information about IObjectsafety, visit the Microsoft TechNet Web site
What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. This can also include compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.
What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visit a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.
What is the ActiveX opt-in feature in Windows Internet Explorer 7?
Windows Internet Explorer 7 includes an ActiveX opt-in feature, which means that nearly all pre-installed ActiveX controls are off by default. Users are prompted by the Information Bar before they can instantiate a previously installed ActiveX control that has not yet been used on the Internet. This enables a user to permit or deny access on a control-by-control basis. For more information about this and other new features, see the Windows Internet Explorer 7 features page.
What does the update do?
This update sets the kill bit for a list of Class Identifiers (CLSIDs).
The Class Identifiers are as follows:
Class Identifier: Software:
{8B217746-717D-11CE-AB5B-D41203C10000} Microsoft Visual Basic 6
{8B217752-717D-11CE-AB5B-D41203C10000} Microsoft Visual Basic 6
{8B21775E-717D-11CE-AB5B-D41203C10000} Microsoft Visual Basic 6
When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.
When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued.
ActiveX Object Memory Corruption Vulnerability - CVE-2007-3041:
A remote code execution vulnerability exists in the ActiveX object, pdwizard.ocx. An attacker could exploit the vulnerability by constructing a specially crafted Web page. When a user views the Web page, the vulnerability could allow remote code execution. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged on user.
To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2007-3041.
Mitigating Factors for ActiveX Object Memory Corruption Vulnerability - CVE-2007-3041:
Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:
* In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail or Instant Messenger message that takes users to the attacker's Web site.
* An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
Workarounds for ActiveX Object Memory Corruption Vulnerability - CVE-2007-3041:
Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:
* Prevent COM objects from running in Internet Explorer
You can disable attempts to instantiate a COM object in Internet Explorer by setting the kill bit for the control in the registry.
Warning If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.
For detailed steps that you can use to prevent a control from running in Internet Explorer, see Microsoft Knowledge Base Article 240797. Follow these steps in this article to create a Compatibility Flags value in the registry to prevent a COM object from being instantiated in Internet Explorer.
Note The Class Identifiers and corresponding files where the COM objects are contained are documented under What does the update do? in the FAQ for ActiveX Object Memory Corruption Vulnerability - CVE-2007-3041 subsection. Replace {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} below with the Class Identifiers found in this section.
To set the kill bit for a CLSID with a value of {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}, paste the following text in a text editor such as Notepad. Then, save the file by using the .reg file name extension.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\ActiveX Compatibility\{ XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX }]
"Compatibility Flags"=dword:00000400
You can apply this .reg file to individual systems by double-clicking it. You can also apply it across domains by using Group Policy. For more information about Group Policy, visit the following Microsoft Web sites:
* Group Policy collection
* What is Group Policy Object Editor?
* Core Group Policy tools and settings
Note You must restart Internet Explorer for your changes to take effect.
Impact of Workaround: There is no impact as long as the object is not intended to be used in Internet Explorer.
* Set Internet and Local intranet security zone settings to High to prompt before running ActiveX Controls and Active Scripting in these zones
You can help protect against this vulnerability by changing your settings for the Internet security zone to prompt before running ActiveX controls. You can do this by setting your browser security to High.
To raise the browsing security level in Microsoft Internet Explorer, follow these steps:
1. On the Internet Explorer Tools menu, click Internet Options.
2. In the Internet Options dialog box, click the Security tab, and then click the Internet icon.
3. Under Security level for this zone, move the slider to High. This sets the security level for all Web sites you visit to High.
Note If no slider is visible, click Default Level, and then move the slider to High.
Note Setting the level to High may cause some Web sites to work incorrectly. If you have difficulty using a Web site after you change this setting, and you are sure the site is safe to use, you can add that site to your list of trusted sites. This will allow the site to work correctly even with the security setting set to High.
Impact of workaround: There are side effects to prompting before running ActiveX Controls and Active Scripting. Many Web sites that are on the Internet or on an intranet use ActiveX or Active Scripting to provide additional functionality. For example, an online e-commerce site or banking site may use ActiveX Controls to provide menus, ordering forms, or even account statements. Prompting before running ActiveX Controls or Active Scripting is a global setting that affects all Internet and intranet sites. You will be prompted frequently when you enable this workaround. For each prompt, if you feel you trust the site that you are visiting, click Yes to run ActiveX Controls or Active Scripting. If you do not want to be prompted for all these sites, use the steps outlined in "Add sites that you trust to the Internet Explorer Trusted sites zone .
* Add sites that you trust to the Internet Explorer Trusted sites zone
After you set Internet Explorer to require a prompt before it runs ActiveX controls and Active Scripting in the Internet zone and in the Local intranet zone, you can add sites that you trust to the Internet Explorer Trusted sites zone. This will allow you to continue to use trusted Web sites exactly as you do today, while helping to protect you from this attack on untrusted sites. We recommend that you add only sites that you trust to the Trusted sites zone.
To do this, follow these steps:
1. In Internet Explorer, click Tools, click Internet Options, and then click the Security tab.
2. In the Select a Web content zone to specify its current security settings box, click Trusted Sites, and then click Sites.
3. If you want to add sites that do not require an encrypted channel, click to clear the Require server verification (https:) for all sites in this zone check box.
4. In the Add this Web site to the zone box, type the URL of a site that you trust, and then click Add.
5. Repeat these steps for each site that you want to add to the zone.
6. Click OK two times to accept the changes and return to Internet Explorer.
Note Add any sites that you trust not to take malicious action on your computer. Two in particular that you may want to add are *.windowsupdate.microsoft.com and *.update.microsoft.com. These are the sites that will host the update, and it requires an ActiveX Control to install the update.
FAQ for ActiveX Object Memory Corruption Vulnerability - CVE-2007-3041:
What is the scope of the vulnerability?
This is a remote code execution vulnerability. An attacker who successfully exploited this vulnerability could gain the same user rights as the logged on user.
What causes the vulnerability?
When the ActiveX object is used in Internet Explorer, the objects may corrupt the system state in such a way that an attacker could execute arbitrary code.
What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could gain the same user rights as the logged on user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
How could an attacker exploit the vulnerability?
An attacker could host a specially crafted Web site that is designed to exploit this vulnerability through Internet Explorer and then convince a user to view the Web site. This can also include compromised Web sites and Web sites that accept or host user-provided content or advertisements. These Web sites could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or in an Instant Messenger request that takes users to the attacker's Web site. It could also be possible to display specially crafted Web content by using banner advertisements or by using other methods to deliver Web content to affected systems.
What systems are primarily at risk from the vulnerability?
This vulnerability requires that a user be logged on and visit a Web site for any malicious action to occur. Therefore, any systems where Internet Explorer is used frequently, such as workstations or terminal servers, are at the most risk from this vulnerability.
What is the ActiveX opt-in feature in Windows Internet Explorer 7?
Windows Internet Explorer 7 includes an ActiveX opt-in feature, which means that nearly all pre-installed ActiveX controls are off by default. Users are prompted by the Information Bar before they can instantiate a previously installed ActiveX control that has not yet been used on the Internet. This enables a user to permit or deny access on a control-by-control basis. For more information about this and other new features, see the Windows Internet Explorer 7 features page.
What does the update do?
This update sets the kill bit for a list of Class Identifier (CLSIDs).
The Class Identifier is as follows:
Class Identifier: Software:
{0DDF3B5C-E692-11D1-AB06-00AA00BDD685} Microsoft Visual Basic 6.0
When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.
When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers and had not seen any examples of proof of concept code published when this security bulletin was originally issued
|
|
|
|
|
